Purchase Our Revit CADclips
  Download Access, DVDs or Both.
           
  Search for Training Topics
(Use minimum amount of characters)
  

REVIT 2014 - New Features
Release Date: April 20, 2013

REVIT 2014 Has Arrived and CADclips is here to show you all the cool new features
Go To      
REVIT 2013 - Materials Dialog Box
Release Date: March 27, 2013

Here we unfold the mystery of the REVIT 2013 Materials Dialog Box !
Go To      
REVIT 2013 - Sloping Balcony Void Family
Release Date: January 24, 2013

Here we show you a super cool tip on using the new REVIT 2013 'Voids' in families. Life just got a little more creative !
Go To      
REVIT 2013 - MEP Introduction
Release Date: October 4, 2012

Learning to Master REVIT MEP 2013 starts right here. This introduction series will give you the basics as well as point out some of the new features.
Go To      
REVIT 2013 - View Types and View Templates
Release Date: September 20, 2012

Learn all there is to know about the new time saving REVIT 2013 View Types and View Template tools.
Go To      
REVIT 2013 - MEP Electrical Duplex Receptacle
Release Date: September 6, 2012

There is more than meets the eye in that little duplex receptacle family. Here we learn a ton of very useful tips about annotation families, nested families, nest parameters, on / off parameters, parameter formulas and view range tips.
Go To      
REVIT 2013 - Project Browser and Project Parameters
Release Date: July 31, 2012

The Project Browser contains Views and Sheets that get organized by View, Sheet and Project parameters. Learn all about it.
Go To      
REVIT 2013 - Options, Project Templates and View Templates
Release Date: July 31, 2012

Here are a few juicy REVIT 2013 CADclip tips on the new Options Dialog box, Project Templates and View Templates.
Go To      
REVIT MEP 2012 - General Introduction
Release Date: November 13, 2011

REVIT MEP is coming of age and the learning begins here. This General, but very detail, Introduction training is designed to give you a solid REVIT MEP foundation. After which you can confidently move on to our REVIT HVAC, Electrical, Plumbing and Piping training.
Go To      
REVIT Arch. 2012 - Assemblies
Release Date: November 2, 2011

Assemblies can make your life alot easier when you want to split the model up into seperate 'assemblies' as seperate contracts. Asemblies can be isolated, documented and issued seperately as a subcomponent of the project model.
Go To      
REVIT Arch. 2012 - Work Plane Viewer
Release Date: October 9, 2011

Good for all REVIT disciplines. Everyone needs to take advantage of the Work Plane Viewer. It's that simply. It's great for novice users and an ABSOLUTE MUST for advancing users. 9 videos later, using the Family Editor will never be the same !
Go To      
REVIT Arch. 2012 - Clipboard Panel Tools
Release Date: October 5, 2011

Good for all REVIT disciplines. The Copy and Paste Tools in REVIT are U n d e r s t a t e d. Learn to Move and Replicate 3D and 2d Elements in 3D and 2d Views with Ease.
Go To      
REVIT Arch. 2012 - Geometry Panel Tools
Release Date: September 27, 2011

Good for all REVIT disciplines. This is a power packed mini series of hands on experience using the REVIT Geometry Modification tools.
Go To      
REVIT Arch. 2012 - Modify Tools
Release Date: September 27, 2011

Good for all REVIT disciplines. Here we dig DEEP into the day to day Modify tools.
Go To      
REVIT Arch. 2012 - My First Project
Release Date: September 18, 2011

This 14 Hour CADclip Video Series is Perfect for New and Intermediate REVIT users.
Go To      
REVIT 2012 - Worksets
Release Date: July 30, 2011

Good for all REVIT disciplines. Calling All BIM Managers! Using REVIT 'Worksets' is hugely productive and everyone should be using them. 15 videos later and you will be the master.
Go To      
REVIT Arch. 2011 - In-Place Massing and Curtain Systems
Release Date: April 26, 2011

Rachel Toon teaches us a few things about in-place massing, curtain systems, materials, camera angles, topography and rendering.
Go To      
REVIT Arch./Str. 2011 - Fire Proofing Structural Members
Release Date: March 6, 2011

You will earn how to add fire proofing to your structural member families.
Go To      
REVIT Architecture 2011 – Design Options
Release Date: December 1, 2010

You will be looking for excuses to use 'Design Options' after watching these 34 videos. Design Options, available for Architecture, Structure and MEP, allow you to parallel multiple design options within a single project file.
Go To      
REVIT Architecture/Structure 2011 – The Ultimate Framing Plan
Release Date: October 4, 2010

Learn what is required to create 'Your Ultimate Framing Plan'. It just doesn't work right. Nor does it view properly from below. . . . until now that is !
Go To      
REVIT Structure 2011 – Basics and 3 Storey Building
Release Date: September 12, 2010

This comprehensive series starts out with the basics of RST 2011 and then segues into a 3 storey building.
Go To      
REVIT Structure 2011 - Custom Family – Haunched Concrete Beam
Release Date: September 12, 2010

This great series teaches you about custom beam families, void extrusions, reference planes and parameters.
Go To      
REVIT Architecture 2011 – Custom Family – Residential Grab Bar
Release Date: September 12, 2010

This power packed mini series will give you some huge tips on custom families with sweep, extrude and constraining and our coined '4b Approach' to making families.
Go To      
REVIT Architecture 2011 – Roof Tips and In-Place Families
Release Date: August 9, 2010

Once again we provide some valuable and undocumented roof tips as well as some cool, in-place family tips for a set of triangular windows and some fancy fascia boards.
Go To      
REVIT Architecture 2011 – Arched Opening and in-Place Sweep
Release Date: August 9, 2010

Here we load and manipulated the Elliptical Arched Opening Family and then create an In-Place sweep to decorate the perimeter. More undocumented CADclip tips.
Go To      
REVIT Architecture 2011 – Introduction and 4 Storey Building
Release Date: June 4, 2010

These CADclips are a hybrid combination of 'Essential information' with a nice big slice of 'The power of REVIT'.
Go To      
REVIT Architecture 2011 – Roof Basics
Released in May 2010

This series covers the basics of creating roofs for Gable, Hip, Gambrel, Mansard, Butterfly and Shed conditions.
Go To      
REVIT Architecture 2010 – Parametric Garage Magic
Released in December 2009

Well, it’s time to learn 'Parametric Conceptual Massing'. BUT we take it two BIG steps further and incorporate the Building Maker Toolsand Material Takeoffs. This series will open your eyes to the potential of the latest in BIM.
Go To      
REVIT Architecture 2010 – My First Parametric Conceptual Mass
Released in December 2009

We are off to the races with Parametric Conceptual Massing and this series will get you on the right track. Within the new conceptual massing environment we create a loadable massing family.
Go To      
REVIT Architecture 2010 – Custom Family - Basic Arched Window
Released in December 2009

We have redone this series with some updated knowledge. Inside these 24 very detailed lessons we teach you 100's of tips on creating useful, robust families by means of an Arched Window.
Go To      
REVIT Architecture 2010 – Custom Family - Architectural Column with Sweep and Reveal
Released in December 2009

This is a great series with tons of non documented tips on creating a custom architectural column. We cover solids, voids, sweeps, reveals, extrusions and much more.
Go To
REVIT Architecture 2010 – Custom Family - Eyebrow Dormer
Released in November 2009

This two part series explains how to use and in-place family with a solid blend and a vertical opening to create a sloping eyebrow roof dormer.
Go To
REVIT MEP 2010 – Advanced Object Display
Released in October 2009

Using filters correctly is an absolute must for all RME users. These lessons will make you the master of object styles, visibility graphics overrides, filters and color schemes.
Go To
REVIT MEP 2010 – Getting Geared Up
Released in September 2009

Everyone who uses REVIT MEP must learn this information before they start to model anything.
Go To
REVIT MEP & Architecture 2010 – Connecting the RME and RAC 'Connectors'
Released in August 2009

This is absolute critical information to all RME people using the RAC model.
Go To
REVIT Architecture 2010 – Site Plans and Topo Surfaces
Released in August 2009

Get lots of excellent tips on managing Site Plans and Topo Surfaces.
Go To
REVIT Architecture 2010 – Curved Wall Tricks
Released in August 2009

Learn some neat things about curved walls not documented anywhere but here.
Go To
REVIT Structure 2010 – Using the RAC Model
Released in July 2009

The Building Information Modeling era has begun and it all starts with model discipline collaboration. As expected CADclips is here to lead the way.
Go To
REVIT Architecture 2010 – Custom Family - View Titles
Released in July 2009

This Short and Sweet custom annotation series is good for users of all levels. These lessons are available for all our Architecture, Structure, and MEP Subscribers.
Go To      
REVIT Architecture 2010 – Custom Family - Fancy Metal Railing
Released in June 2009

Advanced lessons on custom families that will enable you to go to that next level of content creation. These lessons are available for all our Architecture, Structure, and MEP Subscribers.
Go To      
REVIT Architecture 2010 – Basics
Released in June 2009

This is a great series for REVIT users new and old. Here we blow the doors wide open on RAC 2010 and use the new Ribbon interface as our road map.
Go To      
REVIT Architecture 2010 – WalkThroughs
Released in May 2009

Creating Walkthroughs will be fun and easy once you see these 9 videos.
Go To      
REVIT Structure 2010 – Get Your Feet Wet
Released in April 2009

Inside 68 minutes we can educate you on the latest REVIT Structure 2010 changes.
Go To      
REVIT Architecture 2010 – Get Your Feet Wet
Released in April 2009

Here we provide a nice easy set of lessons to help introduce you to RAC 2010 and educate you on some of the major changes and new features.
Go To